Musty odor that will not go away
We locate the source with a thermal imaging camera, remove contaminated materials, and run ozone generators and air scrubbers. The odor is gone after clearance testing confirms no active growth.
Mold remediation after water damage in Naples means stopping active mold growth, removing contaminated materials, and drying the structure so spores cannot return. Our mold cleanup Naples crews handle everything from a slab leak in Old Naples to storm flooding near Vanderbilt Beach. We test, contain, remove, and verify. If you see discolored drywall or smell that musty odor, call us before the colony spreads.
Tell us what is happening. Our local team will confirm your visit shortly.
Call Now +18773640731 → No spam. No obligation. Just practical help.
Mold remediation after water damage in Naples is the controlled removal of mold colonies, contaminated drywall, insulation, and carpet padding, followed by antimicrobial treatment and structural drying. It is not a wipe-down with bleach. We set containment with polyethylene sheeting, run air scrubbers to capture airborne spores, and use a moisture meter and thermal imaging camera to map hidden moisture inside walls and ceilings. Every affected cavity gets treated, not just the visible surface.
In Naples, mold can colonize wet drywall in 24 to 48 hours. The subtropical humidity, afternoon storms, and aging plumbing in neighborhoods like Old Naples and The Moorings create perfect conditions for black mold remediation Naples homeowners need quickly. A burst pipe behind a kitchen wall or a roof leak during a summer downpour often leaves hidden moisture that feeds mold for weeks before you notice it. If you are searching for mold remediation after water damage near me Naples, our team responds 24/7.
Every job includes inspection, containment, removal, treatment, drying, and clearance testing. We do not sub out the work. Add-ons like duct cleaning or cabinet removal are quoted separately if needed.
We use a moisture meter, hygrometer, and thermal imaging camera to find all wet areas. This step takes 45 to 90 minutes and produces a written report with photos and readings.
We seal the work zone with polyethylene sheeting and run air scrubbers with HEPA filters. Negative pressure keeps spores from spreading. Setup takes 1 to 2 hours.
We remove mold-damaged drywall, insulation, carpet padding, and baseboards. All materials are bagged and disposed of properly. Removal takes 1 to 3 days depending on scope.
All exposed framing and surfaces get treated with antimicrobial spray. We use Fiberlock coatings on structural wood where needed. Treatment is included in every job.
We place Dri-Eaz and Phoenix Restoration Equipment dehumidifiers and air movers. Drying takes 3 to 5 days. We monitor daily with a hygrometer and do not remove equipment until dry standard is met.
We run final air quality testing to confirm spore counts are normal. You receive a written report with lab results. If any area fails, we re-treat at no extra cost.
We arrive with a moisture meter, hygrometer, and thermal imaging camera to map the affected area. Air samples go to a lab for spore identification. This step takes 45 to 90 minutes. You get a written scope with photos and moisture readings the same day.
We seal off the work area with polyethylene sheeting and duct tape, then install air scrubbers to create negative pressure. This keeps mold spores from spreading to clean rooms. Setup takes 1 to 2 hours depending on the size of the affected zone.
We remove mold-damaged drywall, insulation, carpet padding, and baseboards. All exposed framing gets treated with antimicrobial spray. We use Fiberlock coatings on structural wood where needed. Removal typically takes 1 to 3 days for a single room, longer for whole-house contamination.
After removal, we place Dri-Eaz and Phoenix Restoration Equipment dehumidifiers and air movers to dry the structure. We monitor moisture daily with a hygrometer. Drying takes 3 to 5 days. We do not remove equipment until readings match dry standard.
We run clearance air testing to confirm spore counts are normal. You receive a written report with before-and-after lab results. If any area fails, we re-treat at no additional cost. Final walkthrough takes 30 to 60 minutes.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Pin-type and pinless meters measure moisture content in drywall, wood, and concrete. We use them to map the affected area and confirm dry standard.
Infrared cameras reveal temperature differences caused by hidden moisture. We use them to find wet pockets behind walls and under floors without demolition.
HEPA-filtered air scrubbers capture airborne mold spores and particles. We run them continuously during remediation to maintain negative pressure.
Dri-Eaz and Phoenix Restoration Equipment dehumidifiers remove moisture from the air. We use them to dry structural cavities after mold removal.
Ozone generators neutralize odors and kill mold spores in unoccupied spaces. We use them after removal and before final testing.
Borescope cameras let us see inside wall cavities and ductwork without cutting large openings. We use them to verify mold removal in hidden areas.
A slab leak in an Old Naples home soaked the bathroom floor and wall. Black mold covered 12 square feet of drywall. The musty odor spread to the hallway.
We removed the moldy drywall and insulation, treated the framing, and dried the slab. Clearance testing confirmed normal spore levels. The bathroom was rebuilt in 6 days.
A roof leak in a Vanderbilt Beach home fed mold across 80 square feet of attic sheathing. The homeowner noticed a musty smell in the master bedroom.
We removed affected insulation, treated the sheathing with antimicrobial spray, and dried the attic. Air testing cleared in 4 days. The roof was repaired by a licensed roofer.
A burst pipe under a Pelican Bay kitchen sink soaked the cabinet base and drywall. Mold appeared within 5 days. The homeowner was worried about insurance.
We documented the damage with Xactimate, removed moldy materials, and dried the area. The claim was approved. Remediation took 5 days and passed clearance.
Mold after water damage creates health risks, structural damage, and insurance headaches. We solve all three with documented, code-correct remediation.
Ask a pro →We locate the source with a thermal imaging camera, remove contaminated materials, and run ozone generators and air scrubbers. The odor is gone after clearance testing confirms no active growth.
We set containment, remove the affected drywall and insulation, treat framing with antimicrobial spray, and dry the cavity. We verify with air testing before closing walls.
We document the cause and scope with Xactimate line items, photos, and moisture readings. That package gives your adjuster what they need to approve the claim.
We remove the source materials, dry the structure to dry standard, and treat all exposed surfaces. We do not close up until moisture readings confirm the area is dry.
Most mold remediation jobs in Naples run $1,500 to $6,500 in 2026, depending on the square footage affected and how many materials must be removed. A single bathroom with mold behind the drywall typically costs $1,800 to $3,200. Whole-room contamination with carpet padding and baseboards removed can reach $5,000 to $8,000. Air quality testing adds $300 to $600.
A typical mold remediation job in Naples takes 3 to 7 days from containment to clearance. Removal usually takes 1 to 3 days. Drying takes another 3 to 5 days. Final air testing adds one day. Larger jobs involving multiple rooms or HVAC contamination can take 10 to 14 days. We give you a day-by-day schedule before we start.
Mold remediation is often covered when it results from a sudden, accidental water event like a burst pipe or appliance leak. Most Florida policies exclude mold that stems from long-term neglect or repeated flooding. We document the cause and scope with Xactimate so your adjuster can process the claim. We work directly with all major carriers.
You may have mold if you see discolored drywall, smell a musty odor, or notice warped baseboards after a leak. Mold can grow behind walls where you cannot see it. We use a moisture meter and thermal imaging camera to find hidden moisture. Air quality testing confirms whether spores are elevated. Call us for an inspection if your home flooded within the last 60 days.
Mold spreads fast in Naples humidity. We are IICRC certified, licensed, and insured. Call now for a same-day inspection and a written scope before work begins.
Call Now +18773640731 →Call us any time, day or night, at +18773640731. We answer live and dispatch a crew, usually within 60 minutes across Collier County. If you prefer email, send photos and your address to info@naplesrestoreexperts.com and we will follow up fast.