Mold growth behind walls after a leak
We remove the wet drywall, treat the framing with antimicrobial spray, and run an air scrubber. Our IICRC AMRT certified team follows mold remediation protocols to make your home safe again.
Wet drywall removal and replacement in Naples is the fastest way to stop mold and save your walls. We cut out saturated board, dry the framing, and hang new drywall that matches your home. If a burst pipe, roof leak, or storm flooding soaked your walls, call us 24/7. We serve Old Naples, Pelican Bay, and every neighborhood in between.
Tell us what is happening. Our local team will confirm your visit shortly.
Call Now +18773640731 → No spam. No obligation. Just practical help.
Wet drywall removal and replacement in Naples is the process of cutting out water-saturated drywall, drying the framing and insulation behind it, and installing new board that is taped, mudded, and finished to match your home. Drywall acts like a sponge. Once it absorbs water, it loses strength, grows mold within 24 to 48 hours, and cannot be dried in place. We use a moisture meter and thermal imaging camera to map exactly how far the water traveled, then remove only what is wet.
Naples homes face water intrusion from burst pipes, slab leaks, roof leaks, and storm flooding. High humidity makes it worse. If you search for wet drywall removal and replacement near me Naples after a storm, you need a crew that can tear out, dry, and rebuild fast. Our IICRC WRT and ASD certified technicians handle emergency wet drywall removal in Naples and rebuild the wall so it looks like nothing happened.
Every wet drywall removal and replacement job includes the full scope from inspection to final paint. We do not leave you with open walls. Here is what is covered when you hire us.
We use a moisture meter, hygrometer, and thermal imaging camera to find every wet area. You get a written report with photos and readings. This tells us exactly where to cut and how much drywall to remove.
We seal the work area with polyethylene sheeting and duct tape. We remove wet drywall, insulation, and baseboards. All debris is bagged and hauled away. We protect your floors with absorbent pads.
After removal, we spray the exposed framing with antimicrobial spray. This kills mold spores and prevents new growth. We also run an air scrubber to capture airborne particles during the work.
We set up air movers and a dehumidifier to dry the wall cavity. We check moisture levels daily until the framing is dry. This usually takes two to three days. We do not rebuild until the readings are safe.
We hang new drywall, tape, mud, and sand it smooth. We match the existing texture and paint. Baseboards go back on. The finished wall looks original and is ready for normal use.
We provide photos, moisture readings, and an Xactimate estimate for your insurance claim. We work with your adjuster to make sure the covered work is approved. You get the documentation you need without the hassle.
We start with a moisture meter, hygrometer, and thermal imaging camera to find every wet spot. We check the ceiling, baseboards, and insulation. You get a written scope with photos and moisture readings. This takes 30 to 60 minutes and tells us exactly how much drywall needs to come out.
We seal the work area with polyethylene sheeting and duct tape to keep dust and mold spores out of your clean rooms. We lay absorbent pads on your floors and move furniture. If there is standing water, we pump it out with a submersible pump before we cut anything.
We cut out the wet drywall 12 to 24 inches past the visible moisture line. That gives us clean, dry edges to work with. We bag the wet material and haul it away. If insulation is wet, it comes out too. This step usually takes two to four hours for an average room.
With the wet board gone, we set up air movers and a dehumidifier to dry the framing and subfloor. We check moisture levels every day. Most wall cavities dry in two to three days. We do not rebuild until the framing reads dry on our meter.
We hang new drywall, tape, mud, and sand it smooth. We match the existing texture and paint so the repair disappears. Baseboards go back on, and we clean up. Most rebuilds take one to two days after the cavity is dry.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Measures moisture content in drywall and framing. We use it to find the exact boundary between wet and dry material so we only remove what is necessary.
Detects temperature differences behind walls to find hidden moisture. It helps us locate leaks and wet spots that are not visible to the eye.
High-velocity fans that circulate air through the wall cavity to speed drying. We position them to dry framing and subfloor after drywall removal.
Removes moisture from the air to prevent secondary damage. We run dehumidifiers alongside air movers to dry the entire space.
Filters airborne particles, including mold spores and dust, during demolition and drying. It keeps your indoor air quality safe.
Eliminates odors caused by mold and bacteria after wet drywall removal. We use it in unoccupied spaces to neutralize smells at the source.
Removes standing water from flooded rooms before we remove drywall. It handles large volumes quickly to limit water spread.
A burst pipe under the sink soaked the kitchen wall and baseboards. Moisture readings were above 30%. Mold was starting behind the drywall. The homeowner called us at 6 a.m.
We removed 32 square feet of wet drywall, dried the framing for three days, and rebuilt the wall. The new drywall was textured and painted to match. Moisture readings dropped below 10%.
A roof leak during a storm soaked the ceiling drywall in a Pelican Bay condo. The drywall was sagging and stained. The homeowner was worried about a collapse.
We removed 48 square feet of wet ceiling drywall, dried the joists, and installed new board. We matched the texture and paint. The ceiling is now solid and looks original.
An AC leak dripped down a hallway wall in Park Shore for weeks. The drywall was soft and discolored. A musty odor filled the hallway. The homeowner had no idea where the water was coming from.
We used a thermal imaging camera to find the leak, removed 24 square feet of wet drywall, dried the cavity, and rebuilt the wall. The odor was eliminated with an ozone generator.
Wet drywall causes more damage the longer it sits. These are the problems we see every week in Naples, and how we fix them before they get worse.
Ask a pro →We remove the wet drywall, treat the framing with antimicrobial spray, and run an air scrubber. Our IICRC AMRT certified team follows mold remediation protocols to make your home safe again.
We remove the sagging drywall, dry the joists, and install new ceiling board. We match the texture and paint so the repair is invisible. This is often done with wet ceiling drywall removal Naples services.
We find the moisture source, remove wet drywall, and treat the area. We use an ozone generator and air scrubber to eliminate odors. Once the source is gone, the smell goes away for good.
We document everything with photos, moisture readings, and an Xactimate estimate. We work directly with your adjuster. This gives you the best chance of a full approval for drywall water damage restoration Naples claims.
Most wet drywall removal and replacement jobs in Naples cost $3.50 to $8.00 per square foot in 2026, including removal, drying, and rebuild. A single room often runs $800 to $2,500. Larger areas with mold or insulation damage cost more. We provide a free estimate with a written scope before we start.
Yes, if the drywall is saturated. Wet drywall cannot be dried in place. It loses strength, grows mold in 24 to 48 hours, and traps moisture against the framing. We use a moisture meter to confirm. If the reading is above 16%, the board needs to come out. If it is only surface damp, we may be able to dry it.
Removal takes two to four hours for an average room. Drying the wall cavity takes two to three days. Rebuilding the drywall takes one to two days after that. Most jobs are finished in four to six days total. Larger areas or mold remediation can add a few days.
Yes, most homeowners insurance policies cover sudden water damage, including wet drywall removal and replacement. Storm flooding, burst pipes, and appliance leaks are usually covered. We document everything with photos, moisture readings, and an Xactimate estimate to support your claim. We work directly with your adjuster.
Wet drywall does not wait, and neither do we. Call Naples Restore Experts for 24/7 emergency service. We are licensed, insured, and IICRC certified. Same-day estimates, no charge. Let us remove the wet board, dry your walls, and rebuild them right.
Call Now +18773640731 →Call us any time, day or night, at +18773640731. We answer live and dispatch a crew, usually within 60 minutes across Collier County. If you prefer email, send photos and your address to info@naplesrestoreexperts.com and we will follow up fast.